JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 53

A medium-scale test bench (see Figure 5) was developed to test a 10-15m long blade sections. These tests complement the results of the full-scale tests, since additional load combinations may be applied and the strength of each part of the blade is checked separately. Finally, the full-scale tests were redesigned to reproduce real field conditions as much as possible, applying full-scale aircraft design techniques based on various testing cycles at several different load levels and enlargement of the blade tests to consider all the hard-fatigue cycles expected in operation.
Fig. 4: G10X blade intermediate joint

- The Gamesa high-efficiency lightning protection system (LPS) has been adapted to the size and modularity of G10X blades. The G10X LPS is already validated according to IEC61400-24 2010 requirements. - An optional light beacon system, made of non-conductive materials to prevent influences on the LPS, may be installed at the tip of the blade.

of the intermediate joint was validated according to aircraft regulations for fail-safe structures – the most demanding industrial standards worldwide-. The blade validation process included four levels: material tests, subcomponent tests, medium-scale tests and full-scale tests. All the critical design details (such as the intermediate joint system components) were tested at the subcomponent scale. At this validation level, several specimens were tested for each component and failure mode, ageing and temperature effects were tested and the effect of the critical process parameters was evaluated.

The complete validation programme included more than 250 coupon tests, 150 subcomponent tests, 25 mediumscale tests and a final series of fullscale tests according to IEC-61400-23 specifications. This programme required more than a hundred thousand skilled engineering man-hours. The field results of the first G10X4.5MW confirm the high performance of the wind turbine, including G10X modular blades. With the positive results of the highly demanding validation plan, the G10X-4.5MW is now ready for commercial exploitation with full confidence in the new technologies. n
More information: www.gamesacorp.com

Validation of G10X blades
A new blade validation concept was developed together with the new technologies. G10X blades comply with IEC regulations (the Type Certificate was obtained in 2011) and the design

Fig. 5: Gamesa’s medium-scale test bench

No74 July 2012

/ jec composites magazine 53


http://www.gamesacorp.com

JEC COMPOSITES MAGAZINE - Issue #74 - July 2012

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #74 - July 2012

Cover
Edito
Point of view: Closer to the shop floor
Contents
Agenda of Events
COMPANY & BUSINESS
- In Brief
- Glass fibre
APPLICATIONS
- Pipes & tanks
- Building
MARKET
- Human resources
- Glass fibre
- Turkey
FEATURE AUTOMOTIVE
- Braiding
- Lightening
- D-LFT
- Sustainability
- RTM
- RIM
RESEARCH & DEVELOPMENT
- Design
- Fatigue behaviour
TECHNOLOGY & INNOVATIONS
- Wind
- Reinforcement
Index
In the world
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Cover
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 2
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Edito
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Point of view: Closer to the shop floor
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 5
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Contents
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 7
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Agenda of Events
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - In Brief
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Glass fibre
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 11
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 12
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Pipes & tanks
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Building
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 15
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 16
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 17
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Human resources
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Glass fibre
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 20
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 21
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Turkey
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 23
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Braiding
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 25
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Lightening
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 27
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 28
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 29
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - D-LFT
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 31
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 32
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 33
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Sustainability
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 35
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 36
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - RTM
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 38
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 39
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - RIM
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Design
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 42
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 43
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 44
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 45
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Fatigue behaviour
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 47
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 48
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 49
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 50
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Wind
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 52
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 53
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Reinforcement
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 55
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 56
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Index
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - In the world
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 59
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 60
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com