JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 33

because the D-LFT side is less stiff/ strong than UD-tape side, it breaks earlier and more easily (lower energy at maximum force). The reverse is true for the stiffer/stronger UD-tape side, which requires more energy to break (higher energy at maximum force). As the D-LFT side breaks, it puts the UD-glass side into tension, so when that impactor breaks through and hits the UD-glass side, there is less kinetic energy left to break the UD-glass side (higher total energy absorbed). All samples broke in the test. Phase 2: shield production time Since compounding, heating and moulding cells were in close proximity, multiple steps were completed simultaneously, giving an effective moulding cycle for the shield part of 70 seconds, which would be

compatible with medium-to-high production volumes. This was a nonoptimized sequence and the preheating operation was the limiting step, not the actual moulding time of 30 seconds or the ILC unit, which can produce compounds at a rate of 8 kg/ min. With further work (e.g. staged oven, automated handling equipment, use of preconsolidated fabrics or laminates and a tool equipped with clamps/fixtures), it should be possible to drop the effective cycle time significantly lower, making tailored D-LFT faster and more costeffective. While pure UD-tape products achieved the highest impact properties in the tests, experience shows that these materials can have problems filling intricate ribbed structures, leading to glass bridging and resin-rich areas,

which are more prone to premature breakage. Hence, a discontinuousglass product like D-LFT offers better mouldability, as well as lower costs and weight. The benefit of a hybrid moulding process like tailored D-LFT is that it allows a number of parameters (e.g. cost, weight, mouldability and higher mechanicals where needed) to be balanced and hence provides manufacturers with the best cost/performance ratio for a given application. As this process becomes better known outside Europe and outside the automotive industry, its use will likely increase where compression-mouldable thermoplastic composites are used and higher mechanicals at balanced or lower mass and costs are desired. n
More information: www.ticona.com

No74 July 2012 /

jec composites magazine 33

Feature Automotive


http://www.ticona.com http://www.eco-dec.be

JEC COMPOSITES MAGAZINE - Issue #74 - July 2012

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #74 - July 2012

Cover
Edito
Point of view: Closer to the shop floor
Contents
Agenda of Events
COMPANY & BUSINESS
- In Brief
- Glass fibre
APPLICATIONS
- Pipes & tanks
- Building
MARKET
- Human resources
- Glass fibre
- Turkey
FEATURE AUTOMOTIVE
- Braiding
- Lightening
- D-LFT
- Sustainability
- RTM
- RIM
RESEARCH & DEVELOPMENT
- Design
- Fatigue behaviour
TECHNOLOGY & INNOVATIONS
- Wind
- Reinforcement
Index
In the world
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Cover
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 2
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Edito
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Point of view: Closer to the shop floor
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 5
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Contents
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 7
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Agenda of Events
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - In Brief
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Glass fibre
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 11
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 12
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Pipes & tanks
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Building
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 15
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 16
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 17
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Human resources
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Glass fibre
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 20
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 21
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Turkey
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 23
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Braiding
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 25
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Lightening
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 27
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 28
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 29
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - D-LFT
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 31
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 32
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 33
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Sustainability
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 35
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 36
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - RTM
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 38
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 39
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - RIM
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Design
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 42
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 43
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 44
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 45
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Fatigue behaviour
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 47
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 48
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 49
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 50
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Wind
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 52
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 53
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - - Reinforcement
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 55
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 56
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - Index
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - In the world
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 59
JEC COMPOSITES MAGAZINE - Issue #74 - July 2012 - 60
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com