JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 43
bi-angle NCF
Advantages of 2-axis layup
of C-PlyTM by automated tape laying
By
Stephen W. Tsai, Professor Emeritus,
Department of Aeronautic & Astronautic,
Alan Nettles, Visiting Scholar,
Stanford University
James Hecht,
Director of Technical Sales, MAG
Bob Skillen, CEO/Chief Engineer,
VX Aerospace Corp.
S
to lower weight, lower cost, and new
opportunities for design and manufacturing.
However, there is an issue for having
the off-axis ply (in this case the
45-degree ply) cut along the edges
of the bi-angle prepreg tape. A seam
is formed when two adjacent tapes
are butted against each other. These
seams can be stacked like brick work in
alternate, orthogonal layers. The first
bi-angle tape goes along the x axis, the
next along the y axis, and so on. Thus,
seams on the first, third and fifth layers
are stacked, one over the other. This is
shown in figure 1.
Depending on the width of the tape,
the seams can also be offset in every
Fig. 1: Staggering of discontinuity seams in a 2-axis layup of a [π/4] panel
Fig. 2: Discontinuity seams stacked on the l,op and
staggered or offset on bottom
No80 April 2013 /
Feature Aeronautics
tanford and Chomarat have
demonstrated the strength and
design flexibility of their patented
C-PlyTM, a bi-angle thin-ply non crimp
fabric (NCF) that has been reported
on previously in this magazine. The
[0/45] tape is of particular significance
because it can be laid in 1-axis to form
[0/±45/0], and in 2-axis to form [π/4].
Other off-axis angles are also available.
By eliminating the need to lay +45 and
-45 plies, the speed of layup can be
more than doubled. This advantage can
mean higher productivity and better
quality due to being less prone to error,
as well as simpler and more optimum
ply drop. All these factors can lead
A proprietary layup sequence of [0/45] bi-angle NCF tape with
50% overlap has reduced the effect on strength of the discontinuity seams in the 45-degree ply. This improvement in the
strength of [p/4] with and without open hole is encouraging for
the use of C-PlyTM with automated tape laying machines.
jec composites magazine 43
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013
Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #80 - April 2013
Cover
Edito
Point of view: hig-end solutuions
Contents
Agenda of Events
COMPANY & BUSINESS In Brief
APPLICATIONS
- Sports & leisure
- Renovation
MARKET
- Singapore
- Education
- Natural fibres
- Biocomposites
FEATURE AERONAUTICS
- Carbon
- Process
- Reinforcement
- Structure
- Bi-angle NCF
- RTM
- Sandwich
- Energy
RESEARCH & DEVELOPMENT
- CAE tools
- CFRP
TECHNOLOGY & INNOVATIONS
- Prepreg
- Material
Index
In the world
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - Cover
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 2
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - Edito
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - Point of view: hig-end solutuions
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 5
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - Contents
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 7
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - Agenda of Events
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 9
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - COMPANY & BUSINESS In Brief
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Sports & leisure
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 12
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 13
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Renovation
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Singapore
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 16
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 17
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 18
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Education
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 20
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 21
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 22
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 23
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 24
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 25
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Natural fibres
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 27
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Biocomposites
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 29
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 30
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 31
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 32
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Carbon
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 34
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Process
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 36
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 37
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Reinforcement
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 39
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 40
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Structure
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 42
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Bi-angle NCF
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 44
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - RTM
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 46
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Sandwich
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 48
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 49
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Energy
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 51
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - CAE tools
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 53
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 54
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - CFRP
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 56
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 57
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 58
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Prepreg
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 60
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 61
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - - Material
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 63
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 64
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - Index
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - In the world
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 67
JEC COMPOSITES MAGAZINE - Issue #80 - April 2013 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm2211_148
https://www.nxtbook.fr/newpress/jeccomposites/jcm2209_147
https://www.nxtbook.fr/newpress/jeccomposites/jcm2206_146
https://www.nxtbook.fr/newpress/jeccomposites/jcm2204_145
https://www.nxtbook.fr/newpress/jeccomposites/jcm2201_144
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com