JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 54

TECHNOLOGY

54

Bonding

62
64

Inside the lab

Adhesion properties of bonded
composite-to-aluminium joints using peel tests
The University of Southern Queensland Centre for Future Materials
Method

Weight and cost reduction with double-double laminates

TECHNOLOGY bonding

Adhesion properties of bonded composite
to aluminium joints using peel tests

Sofia Teixeira De Freitas,
Assistant Professor
Delft University of Technology
Jos Sinke,
Assistant Professor
Delft University of Technology

W

In this research, the adhesion properties of bonded composite-to-aluminium joints are evaluated using floating roller peel tests. The
tests were performed using two different adhesives and different
adherend lay-ups: composite-to-aluminium, composite-to-composite, and aluminium-to-aluminium. The results show that floating
roller peel tests, widely used in metal bonding, can also be used
to assess the adhesion properties of composite bonding and composite-to-aluminium bonding. However, attention should be paid on
which results are important to take from the peel tests. In adhesion
tests, the failure mode is more important than the failure load. The
peel load can only be compared when using the same type of flexible
adherend. Even when the adhesion properties are good (cohesive
failure), the peel load value can decrease up to a factor of 10 when
peeling off a composite flexible adherend instead of an aluminium
flexible adherend.

ith the increasing use of composite materials in the
aerospace industry, composite parts often need to
be joined with either other composite parts or
aluminium parts. Adhesive bonding offers advantages for
joining materials since it avoids drilling holes and using fasteners, which are often a source of stress concentration and
weight increase. Moreover, the replacement of fasteners by
adhesive joints also reduces the time and effort required for
the assembly process.
Most of the available research on bonded composite-to-aluminium joints focuses on determining the lap shear strength
or the fracture characteristics of the adhesive joint. For the

54

fracture analysis, double cantilever beam (DCB) specimens
are mainly used to characterize the crack propagation behaviour and provide input data for fracture mechanics [1,2].
Single- and double-lap joints (SLJ and DLJ, respectively)
have been used to evaluate the shear strength of bonded
composite-to-aluminium joints [3-6]. Analytical and numerical studies have also been performed to predict the lap shear
strength of bonded joints with dissimilar adherends [7-9].
Tab.1: Adhesive curing cycles and peel performance on aluminium-to-aluminium,
in accordance with manufacturers' technical data sheets (TDS)
Adhesive

Peel performance

Cure cycle ( temperature, time)

FM 73

280 N/25 mm

120°C 60 min

EA 9695

90 N/25 mm

120°C 60 min

jec composites magazine / N°137 November - December 2020



JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020

Cover
Edito
“We can change the way we envision global shipping overall”
Contents
NEWS
In brief
Agenda
BUSINESS
Human ressources - Skills requirements in the composite materials sector – the French example
Startup - Make lightness and performance affordable without compromising the environment
Offshore - GWEC: Asia Pacific to become the largest offshore wind market by 2030
MANUFACTURING
Additive manufacturing - The METHOD platform expands to support more materials,applications, and markets
Automation - One-shot manufacturing of cylindrical lattice structures for satellite applications
Recycling - World’s first fully-recycled thermoplastic composite application in aerospace
Additive molding - From large-scale continuous thermoplastic composites to mass production
FEATURE AUTOMOTIVE - Is it possible to do better?
FRP - Fully coupled processstructure analysis for automotive center floor panel
Honeycomb - Composite materials for lighter vehicles
Additive manufacturing - Transforming composite production processes with FDM additive manufacturing
EV - All-composite EV wheel moves to next development phase with pilot production
Security - The world’s fastest armoured car
Natural fibre - Sustainable composite solution for new Toyota LQ concept car
SOLUTIONS
Defence - Drones as wingmen
City - Composites for tomorrow’s cities
Maintenance - Degradation mechanism and maintenance of GFRP hydrochloric acid storage tanks
TECHNOLOGY
Bonding - Adhesion properties of bonded composite-to-aluminium joints using peel tests
Inside the lab - The University of Southern Queensland - Centre for Future Materials
Method - Weight and cost reduction with double-double laminates
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Cover
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 2
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Edito
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - “We can change the way we envision global shipping overall”
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 5
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Contents
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 7
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - In brief
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 9
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Agenda
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Human ressources - Skills requirements in the composite materials sector – the French example
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 12
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 13
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Startup - Make lightness and performance affordable without compromising the environment
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 15
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 16
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Offshore - GWEC: Asia Pacific to become the largest offshore wind market by 2030
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 18
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Additive manufacturing - The METHOD platform expands to support more materials,applications, and markets
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 20
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Automation - One-shot manufacturing of cylindrical lattice structures for satellite applications
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 22
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 23
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Recycling - World’s first fully-recycled thermoplastic composite application in aerospace
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 25
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 26
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Additive molding - From large-scale continuous thermoplastic composites to mass production
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 28
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 29
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - FRP - Fully coupled processstructure analysis for automotive center floor panel
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 31
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 32
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 33
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Honeycomb - Composite materials for lighter vehicles
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 35
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 36
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Additive manufacturing - Transforming composite production processes with FDM additive manufacturing
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 38
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - EV - All-composite EV wheel moves to next development phase with pilot production
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 40
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Security - The world’s fastest armoured car
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 42
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 43
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Natural fibre - Sustainable composite solution for new Toyota LQ concept car
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 45
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 46
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Defence - Drones as wingmen
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 48
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 49
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - City - Composites for tomorrow’s cities
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 51
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Maintenance - Degradation mechanism and maintenance of GFRP hydrochloric acid storage tanks
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 53
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Bonding - Adhesion properties of bonded composite-to-aluminium joints using peel tests
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 55
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 56
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 57
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 58
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 59
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 60
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 61
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Inside the lab - The University of Southern Queensland - Centre for Future Materials
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 63
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Method - Weight and cost reduction with double-double laminates
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 65
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 67
JEC COMPOSITES MAGAZINE - Issue #137 - November/December 2020 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com