JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 28

FEATURE thermoplastics

Fig. 2: Examples of T-profiles and Y-profiles

An issue in state-of-the-art profiles
is how the intersection of the arms
is formed and is constructed. An
advantage of the new solution is that
the intersection of the profile does not
require any of the additional material
in the core that is normally used to fill
this "Bermuda triangle". Due to the
profile's special shape and the forming
process, it is not necessary to use additional material. The filling material
usually has a different coefficient of
thermal expansion in the plane of the
profile's cross section. This leads to
a risk of cracking in the plane of the
profile's cross section due to cooling
from the process temperature. The
filler is normally weaker than the basic
material. When no filler is applied, the
part is made of a more homogeneous
material. This process can also be used
for different profile shapes. Examples
of T-profiles and Y-profiles are shown
in Figure 2.
One-shot process
The project uses the thermoforming
process for consolidated plates, which
is the quickest process to manufacture
parts subjected to significant loads.
The profile is stamped from plate
material of one half of the final profile's thickness. This process is similar
to co-consolidation. The quality of
the surface joining of the blanks was
verified by microsection photos and
by a shear strength test. This test
confirmed that the strength in the
joining plane is fully comparable to
the interlaminar shear strength between the layers of the raw material,
ensuring that the co-consolidation is
of acceptable quality.

28

Fig. 3: A rib with a titanium T-profile and an alternative composite T-profile

Fig. 4: Failure index according to the maximum
stress theory for a given load applied to the
Y-profile

Fig. 5: Specimen loaded in the testing machine

Demonstrator
A T-profile was manufactured and
tested as an alternative to the titanium
T-profile used in the assembly of the
A350 XWB rib.
The load profile of the T-profile is
complex, but the direction of the
pull-up force is a major element of
this load. FEM was used for a stress
analysis of the composite T- and
Y-profiles. Both models were computed in Abaqus software using continuum shell layered elements. Figure 4
shows the results for the failure index
according to the maximum stress
theory for a given load applied to the
Y-profile. The maximum failure index
is 0.25 for the Y-profile and 0.39 for
the T-profile.
Experiment
An experiment was performed on a
one-axis tensile machine, using a simple tool. The tensile load was applied
through the screws in the web of the
element jointed with the machine's
jaws. The load was released just in the
z direction, as shown in Figure 5.
The profiles were tested until total
failure, but some of them were tested
only until the first failure occurred

jec composites magazine / N°135 July - August 2020

Fig. 6: Force/displacement graph for both tested
profiles

(the first visible peak in the loading
curve). Typical load curves for a
T-profile and for a Y-profile are displayed in Figure 6.
The profiles with the first failure were
analyzed using a CT scan and a microsection photo to find the failure area
(see Figure 7).
Comparing the experiment
and the FEM results
Simulations of all types of profiles were
carried out to analyze the location of
the first failure and to compare it with
the experiment finding. The failure
was interlaminar, so layered solid
elements were used in the model. The
geometry of the layers mainly in the
region of the intersection was formed



JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020

Cover
Edito
“We include composite materials in order to offer the most efficient protection”
Contents
NEWS
In brief
Agenda
BUSINESS
China - What is the impact of the Covid-19 crisis on chemical groups in China?
Startup - UBQ introduces the greenest thermoplastic material
Finance - Finding funding
MANUFACTURING
Simulation - Virtual design of a mediacal auto-injection
Method - The importance of FRP process specifications
FEATURE AERONAUTICS - Can composites help restart activity?
- Additive manufacturing: Printing continuous carbon fibre in true 3D
- Thermoplastics: A thermoplastic T-profile with effective lay-up in one shot
- Maintenance: Automated adaptive machining of aircraft composite structures
- OOA: Out-of-autoclave manufacturing processes for composite aerostructures
- Process: Overmoulded interfaces for composite aircraft parts
- Bonding: The Bondline Control Technology
- Interview: “Don’t miss the shift to Green and the chance to make a positive impact on the environment!”
- Testimonials: Aeronautics: now what?
- Natural fibre: A satellite panel reinforced with natural fibres for cleaner space exploration
SOLUTIONS
Autonomous human flight - Sky is no limit for inventors
Building & construction - Building reality with composites
Aerospace - Lightweight liner-less carbon composite subscale cryotank
TECHNOLOGY
Design - Developing CFRP components for machine tools
Inside the lab - Advanced Composites Laboratory,c Texas State University
FEA - Optimization approach for designing composite components
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Cover
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 2
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Edito
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - “We include composite materials in order to offer the most efficient protection”
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 5
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Contents
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 7
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - In brief
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 9
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 10
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Agenda
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - China - What is the impact of the Covid-19 crisis on chemical groups in China?
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 13
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Startup - UBQ introduces the greenest thermoplastic material
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 15
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Finance - Finding funding
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 17
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Simulation - Virtual design of a mediacal auto-injection
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 19
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 20
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 21
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Method - The importance of FRP process specifications
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 23
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Additive manufacturing: Printing continuous carbon fibre in true 3D
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 25
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 26
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Thermoplastics: A thermoplastic T-profile with effective lay-up in one shot
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 28
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 29
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Maintenance: Automated adaptive machining of aircraft composite structures
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 31
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 32
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - OOA: Out-of-autoclave manufacturing processes for composite aerostructures
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 34
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 35
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 36
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Process: Overmoulded interfaces for composite aircraft parts
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 38
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 39
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Bonding: The Bondline Control Technology
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 41
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 42
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 43
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Interview: “Don’t miss the shift to Green and the chance to make a positive impact on the environment!”
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 45
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Testimonials: Aeronautics: now what?
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 47
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 48
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 49
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 50
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Natural fibre: A satellite panel reinforced with natural fibres for cleaner space exploration
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 52
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Autonomous human flight - Sky is no limit for inventors
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 54
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 55
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Building & construction - Building reality with composites
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 57
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Aerospace - Lightweight liner-less carbon composite subscale cryotank
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Design - Developing CFRP components for machine tools
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 60
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 61
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Inside the lab - Advanced Composites Laboratory,c Texas State University
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 63
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - FEA - Optimization approach for designing composite components
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 65
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 67
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com