JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 19

Virtual design of a mediacal auto-injection

mance envelope to highlight any areas
needing improvement.
Any device can be misused to some
extent, parts forced open or dropped.
The tray that opens to insert the syringe
could be pushed hard onto its mechanical stop.
Altair Radioss™ analysis is a virtual
test to aid material selection, design
validation or assessing if the body stays
snapped together, along with the item's
perceived quality. A drop simulation in
Altair Radioss from 1m landing at different orientations showed high stress
levels on component parts and the top
cap unclipping that were resolved by
modifying the needle case and adding
adhesive to retain the cap.

Fig. 2: Generative design - virtual product design

Fig. 3: Virtual product
design - simulation cycle for Nolato's medical
auto-injector

Fig. 4: Virtual product
design - Altair's
integrated injection
moulding simulation
solution

for diabetic patients or adrenaline
(epinephrine) to counter anaphylaxis
(severe allergic reactions);
-	 Reliably dispensing a single dose in a
consistent, safe manner.
The injection-moulded, short fibre-reinforced plastic body houses an electro-mechanical assembly and a battery. This
device effectively presses in a controlled,
reliable manner on the plunger of the hypodermic syringe loaded into the device.
Functionality
The drug delivery process was tested us-

ing computational fluid dynamic (CFD)
analysis in Altair AcuSolve™ coupled with
a multibody dynamics solver in Altair
MotionSolve™.
The factors tested included the hypodermic needle bore size and fluid viscosity,
both of which affect the pressure load
cases on the syringe plunger. Also considered were the loads transmitted to
the casing at the attachment points and
its sensitivity to temperature changes in
terms of operation or possible leaks.
Validation - Use and misuse
Simulation reveals how the device
performs regarding the defined perfor-

Optimization
To find the most efficient structure for
the defined load cases, the optimization
considered several use cases including
bending and torsion.
It also considered the design and
non-design space definition, computer-aided design (CAD) interpretation,
and compared results between the
dominant load cases.
Altair OptiStruct™ was used to investigate an alternative rib structure at
the part level design. Mesh-free Altair
SimSolid™ also provided a fast means
to compare design iterations, verify designs, and check results at the assembly
level.
Manufacturing by
injection moulding
After the component design and with injection moulding identified as the most
suitable manufacturing technique for a
mass-produced polymer item, the next
simulation steps use Altair SimLab™ to
consider filling, cooling cycles along
with predicting the occurrence of any
defects resulting from the moulding
process. These can appear as air pockets,
surface imperfections, sink marks in
thicker ribs, plus weld lines where the
material flows together from different
gates [3].
As the part is produced from a composite comprising a short fibre-reinforced
thermoplastic, the fibre orientation

N°135 July - August 2020

/ jec composites magazine

19



JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020

Cover
Edito
“We include composite materials in order to offer the most efficient protection”
Contents
NEWS
In brief
Agenda
BUSINESS
China - What is the impact of the Covid-19 crisis on chemical groups in China?
Startup - UBQ introduces the greenest thermoplastic material
Finance - Finding funding
MANUFACTURING
Simulation - Virtual design of a mediacal auto-injection
Method - The importance of FRP process specifications
FEATURE AERONAUTICS - Can composites help restart activity?
- Additive manufacturing: Printing continuous carbon fibre in true 3D
- Thermoplastics: A thermoplastic T-profile with effective lay-up in one shot
- Maintenance: Automated adaptive machining of aircraft composite structures
- OOA: Out-of-autoclave manufacturing processes for composite aerostructures
- Process: Overmoulded interfaces for composite aircraft parts
- Bonding: The Bondline Control Technology
- Interview: “Don’t miss the shift to Green and the chance to make a positive impact on the environment!”
- Testimonials: Aeronautics: now what?
- Natural fibre: A satellite panel reinforced with natural fibres for cleaner space exploration
SOLUTIONS
Autonomous human flight - Sky is no limit for inventors
Building & construction - Building reality with composites
Aerospace - Lightweight liner-less carbon composite subscale cryotank
TECHNOLOGY
Design - Developing CFRP components for machine tools
Inside the lab - Advanced Composites Laboratory,c Texas State University
FEA - Optimization approach for designing composite components
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Cover
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 2
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Edito
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - “We include composite materials in order to offer the most efficient protection”
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 5
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Contents
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 7
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - In brief
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 9
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 10
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Agenda
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - China - What is the impact of the Covid-19 crisis on chemical groups in China?
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 13
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Startup - UBQ introduces the greenest thermoplastic material
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 15
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Finance - Finding funding
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 17
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Simulation - Virtual design of a mediacal auto-injection
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 19
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 20
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 21
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Method - The importance of FRP process specifications
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 23
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Additive manufacturing: Printing continuous carbon fibre in true 3D
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 25
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 26
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Thermoplastics: A thermoplastic T-profile with effective lay-up in one shot
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 28
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 29
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Maintenance: Automated adaptive machining of aircraft composite structures
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 31
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 32
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - OOA: Out-of-autoclave manufacturing processes for composite aerostructures
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 34
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 35
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 36
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Process: Overmoulded interfaces for composite aircraft parts
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 38
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 39
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Bonding: The Bondline Control Technology
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 41
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 42
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 43
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Interview: “Don’t miss the shift to Green and the chance to make a positive impact on the environment!”
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 45
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Testimonials: Aeronautics: now what?
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 47
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 48
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 49
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 50
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - - Natural fibre: A satellite panel reinforced with natural fibres for cleaner space exploration
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 52
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Autonomous human flight - Sky is no limit for inventors
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 54
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 55
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Building & construction - Building reality with composites
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 57
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Aerospace - Lightweight liner-less carbon composite subscale cryotank
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Design - Developing CFRP components for machine tools
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 60
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 61
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Inside the lab - Advanced Composites Laboratory,c Texas State University
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 63
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - FEA - Optimization approach for designing composite components
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 65
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 67
JEC COMPOSITES MAGAZINE - Issue #135 - July/August 2020 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com