JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 109

Multi-sector

CURING OVENS FOR
COMPOSITE MATERIALS

Booth: Hall 6 - D31

SAT Thermique offers
a range of standardized
and
tailored-made
ovens for the cure and
post-cure of composite
materials.
These ovens can heat
parts faster with the
best temperature distribution throughout the work
chamber. They are designed for a temperature
uniformity up to +/- 2°C and comply with the most
stringent standards: BAC 5621, AMS 2750 and Nadcap.
SAT's advanced-design oven insulation reduces
energy consumption. The ovens benefit from a reliable,
high-quality construction for low maintenance and are
equipped with a vacuum and air pressure system for
optimised production, from 20°C to 450°C.

www.sat-thermique.com

Multi-sector
Booth: Hall 6 - S60

Multi-sector

www.sharpandtappin.com - www.compcutacm.com

5-AXIS CNC MACHINING CENTRE
FOR COMPOSITES AND ALUMINIUM

LaborMac is a 5-axis machining centre specifically developed to optimize the
machining of aluminium and composite moulds and
parts. The extreme rigidity provided by the monolithic
structure with a gantry-type mobile portal on the Y
axis significantly limits vibrations. The machine is
of the mobile bridge type, with displacement of the
portal along the Y axis and a fixed working table. The
machine's structures and components are designed according to FEM dynamic
principles, to ensure the best resistance even under the most severe working
conditions. The basement is made of high-thickness electro-welded steel and the
main structure is stabilized by a heat treatment. The machine structure is designed
as a "closed cell" to offer the best safety conditions to the operator. All the machine
axis displacements (X, Y and Z) are on LM sliding guides. The guide rails are hardened
and grounded completed with pre-charged double-type roller bearings for the best
displacement and lowest friction. Main features: Linear motors, very high speed and
acceleration; Dual drive on a rotary axis, high-precision interpolation; Monolithic structure,
improved vibration damping; Double guides in the Y axis, increased rigidity; Ultrasonic
device for cutting honeycomb panels. www.comispa.it
Booth: Hall 6 - G32

www.thermwood.com

EUROPEAN LAUNCH ADVANCED
COMPOSITE PLATE SAW

The PCR 600 router is a natural addition to Sharp & Tappin's
Compcut range of advanced composite plate saws and is
capable of tackling the challenges of machining complex
geometries across a wide range of advanced composite
materials. The router is the result of a "proof-of-concept"
development and extensive cutting trial programme run over the last three years
in conjunction with the prestigious National Composites Centre based in Bristol,
England. The end result of this comprehensive development pathway is essentially
a hybrid machining solution incorporating elements from CNC routers such as a
high-speed spindle, large working bed and easy flat laminate compatibility together
with the precision, flood coolant and fully-enclosed structure common to a vertical
machining centre. The PCR 600 is therefore a unique machine tool, tailored to the cutting
of complex geometries from the most challenging, contemporary composites, such as
the ever-increasing variety of complex materials that include thermoplastics, ceramics
and aluminium matrixes. Sharp & Tappin have applied the same market approach to the
PCR router, which underpins the versatile Compcut 200 plate saw - whereby they have
successfully created a compact, easy-to-use machine that provides access to a highquality composite cutting solution that can represent a tangible return on investment.

Multi-sector

Booth: Hall 6 - P50d

Thermwood recently introduced an all-new
LSAM additive manufacturing machine model,
called the LSAM MT. This new machine offers an
all-new configuration and significant advantages
in certain applications. Unlike standard LSAM
systems, which feature dual gantries operating
over a large fixed table, the MT (which stands
for "Moving Table") features a single fixed gantry
mounted over a moving table. Available with
either a 3x1.5m or a 3x3m table, this configuration
offers several significant advantages, not the least
of which is a dramatically lower price. Despite the lower
price, the LSAM MT is still
a massive, robust industrial
production machine capable
of reliable, day in and day out
production. Unlike standard
LSAM systems, the MT can
be configured as a "print only" machine. The logic for
this is simple. Near-net-shape printed tools dramatically
reduce machining times for many companies currently
machining tools from solid blocks of material. This
frees up significant machining capacity that is already
purchased and installed. For these companies, it makes
no sense to purchase additional machining capacity
with their additive system, since the change to additive
frees up more than enough existing capacity to handle
everything they can print. With this in mind, Thermwood
decided to offer both "print and trim" and "print only"
versions of the MT. The MT is available in two table
sizes, 3m wide by 1.5m deep, and 10m by 10m.

Booth: Hall 6 - T37

NEW LARGE SCALE ADDITIVE
MANUFACTURING MACHINE

INNOVATION REPORT

Multi-sector

PREVIEW JEC WORLD

LARGE AND COMPLEX TOOLING
THROUGH 5-AXIS MACHINING
Dutch-Shape is well equipped to fulfil the aim of being
the best in aerospace and automotive tooling. With
its large 5-axis machines, the company can shape
tooling up to 26 × 6 × 3 metres to the nearest tolerance, be it for wing surfaces,
stringers, support structures, body panels or engine nacelles.
To comply with the highest tooling standards, Dutch-Shape has its own engineering
(CATIA) department, extensive experience with 3D forming and welding techniques,
a state-of-the-art production facility, a highly-accurate quality control department
and thoroughly-trained mechanics who can also work on site.

www.dutch-shape.nl
No133 March - April 2020 /

jec composites magazine

109


http://www.sharpandtappin.com http://www.compcutacm.com http://www.thermwood.com http://www.comispa.it http://www.sat-thermique.com http://www.dutch-shape.nl

JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Cover
Edito
“For the past 130 years, every aspect of tire performance has been improved, except for one”
Contents
NEWS
In brief
Agenda
Aerospace
BUSINESS
Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
Trends - Automotive: what will be tomorrow’s reality?
Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
China - China’s glass fibre industry is entering a new cycle
MANUFACTURING
Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
Simulation - New updates for the Composite Materials Module’s users
Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
PREVIEW JEC WORLD 2020
- EDUCATION & KNOWLEDGE
- MARKET OVERVIEW / Fact & figures
- AT THE FOREFRONT IN JEC WORLD 2020
- VIEW FROM THE TOP
- INNOVATION
- SUSTAINABILITY
- END-USE MARKETS
- PROCESS & AUTOMATION
- INTERNATIONAL
SOLUTIONS
Book - Composites in infrastructure
Construction - Composites joining science and religion
Urban equipment - Composite infrastructure products: a new alternative for the construction industry
Aeronautics - To new horizons, with composites
Aeronautics - Thermoplastic composite bracket for aircraft engines
Off shore wind energy - Taming the offshore winds
Biocomposites - Where are natural fibre composites heading?
Natural fibres - The challenges of building large structures from flax fibre composite
TECHNOLOGY
Resin - Properties and composite applications of nanocalcitemodified epoxies
Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CF
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CB
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Cover
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 2
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Edito
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - “For the past 130 years, every aspect of tire performance has been improved, except for one”
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 5
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Contents
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 7
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - In brief
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 9
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 10
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Agenda
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 13
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 15
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 16
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Trends - Automotive: what will be tomorrow’s reality?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 18
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 19
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 21
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - China - China’s glass fibre industry is entering a new cycle
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 23
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 24
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 26
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 27
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 28
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 30
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 31
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Simulation - New updates for the Composite Materials Module’s users
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 33
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 35
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 36
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 38
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 40
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 41
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 42
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 43
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 44
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - EDUCATION & KNOWLEDGE
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 46
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - MARKET OVERVIEW / Fact & figures
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - AT THE FOREFRONT IN JEC WORLD 2020
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 49
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 50
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 51
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - VIEW FROM THE TOP
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 53
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 54
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 55
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INNOVATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 57
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 58
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 59
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 60
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 61
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 62
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 63
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 64
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 65
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 66
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 67
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 68
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 69
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - SUSTAINABILITY
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 71
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - END-USE MARKETS
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 73
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 74
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 75
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 76
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 77
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 78
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 79
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - PROCESS & AUTOMATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 81
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 82
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 83
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 84
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 85
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 86
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 87
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 88
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 89
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 90
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INTERNATIONAL
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 92
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 93
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 94
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 95
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 96
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 97
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 98
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 99
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 100
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 101
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 102
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 103
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 104
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 105
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 106
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 107
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 108
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 109
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 110
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 111
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 112
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 113
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 114
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Book - Composites in infrastructure
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 116
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 117
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Construction - Composites joining science and religion
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 119
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 120
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 121
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Urban equipment - Composite infrastructure products: a new alternative for the construction industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 123
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - To new horizons, with composites
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 125
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 126
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - Thermoplastic composite bracket for aircraft engines
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 128
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Off shore wind energy - Taming the offshore winds
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 130
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 131
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 132
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Biocomposites - Where are natural fibre composites heading?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 134
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 135
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Natural fibres - The challenges of building large structures from flax fibre composite
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 137
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 138
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Resin - Properties and composite applications of nanocalcitemodified epoxies
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 140
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 141
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 142
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 143
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 144
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 145
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 146
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 147
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 149
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 150
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 152
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 153
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 155
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 156
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 157
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 158
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com