JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 108

R&D

Booth: Hall 6 - M74

Aerospace

HEATED TOOL-CURED INTEGRATED WING SKIN
Spirit AeroSystems combined its patented self-heated tooling and resin infusion technology to produce the world's first
lower wing cover (LWC) demonstrator with no autoclave or oven. Utilizing its design for manufacturing and infusion expertise,
Spirit achieved complete integration of the LWC skin, stringers and fuselage fittings into a single component. Combining
Saertex's HTS40 non-crimp fabric, Solvay's 890 resin and a low-cost semi-rigid bag for dimensional control, the company
attained a consistent fibre volume fraction and part tolerances. Saertex's HTS40 also features a thermoplastic veil that improves damage tolerance and
enables weight and material savings. Heat for infusion and cure is delivered through a composite tool with embedded heated zones, each monitored
and controlled independently. Heating the part directly with the tool reduces processing times and equipment costs. The tool also incorporates
a patented resin delivery system, with infusion port locations optimized through resin flow simulations, further minimizing processing times. An
automated stringer cell advances high-rate manufacture by accepting raw material, consolidating, dynamically forming and trimming on-the-fly to
produce tool-ready fabric preforms. Finally, a newly-developed combined inspection and metrology cell streamlines validation. These combined
design, material, simulation, fabrication, and automation innovations significantly reduce costs and enable higher rate composite manufacturing.

www.spiritaero.com

EQUIPMENTS

NEW PNP SERIES PNEUMATIC PRESSES
FOR A WIDE VARIETY OF APPLICATIONS

Booth: Hall 6 - R51a

There is a growing need in composite development for a machine
that has highly-accurate force, temperature and cooling control.
The capabilities of Wabash MPI and Carver, Inc.'s new line of
pneumatic presses for a wide variety of
applications - the PNP Series - fill that void.
Standard models are available in 0.5-, 2- and
5-ton capacities and feature a table-top, fourpost construction. The maximum operating
temperature is 260°C with no 3-phase power
needed.
Other standard features include low-friction seals and bearings,
an infinite-life framework, interchangeable cylinders along with a 90 PSIG
design pressure and five-micron particulate air filters. Optional features
range from CE and clean room designs to platen cooling, heat tubes and
426°C operation, among others. These presses excel in many applications
including composites moulding, laminating, rubber moulding, plastics
testing, fluid/resin extraction, destructive testing, bonding, cell disruption
and sample preparation. This press series features a quiet operation
with no hydraulics to deal with. Minimal maintenance requirements also
make it an excellent addition for companies that are focused on a green
initiative. www.wabashmpi.com

108

jec composites magazine / No133 March - April 2020

Multi-sector

Cevotec expands its service portfolio for manufacturers of aerostructures with the addition of SAMBA Step L in its high-tech lab near Munich,
Germany. The new R&D system expands the range and size of components that can be processed as part of the company's development
services. SAMBA Step L features a six-axis pick&place robot mounted on a linear axis. The increased range allows to deal with larger part sizes
common to complex aerostructures such as fairings, nacelles, panels and radomes. Accordingly, the patch grippers are scaled for patches up
to 200 mm x 300 mm. To enable maximum flexibility in the development process, predefined patches of different sizes and materials can be fed
individually to designated pick-up positions. A smooth deposition of large patches on curved surfaces is realized by
a special roll-placement feature. Cevotec's service offering for aerostructure application development now includes
complex components with larger sizes up to 2 m x 3 m. SAMBA Step L processes many different fibre materials:
carbon, glass, aramid, adhesives, and others. As all SAMBA systems, it features self-corrective real-time process
control, which ensures constant laminate quality and the highest precision as well as repeatability of the placement
process. SAMBA Step L will be ready for customer R&D projects as of spring 2020. Switching manual lay-up to
fibre patch placement saves 20-60% in production cost and time for manufacturers. www.cevotec.com

ULTRASONIC CUTTING
AND SURFACE MACHINING EFFECTOR

The Soniblade L ultrasonic cutting and
surface machining effector is dedicated to
Nomex and aluminium honeycomb. The
cutting knife can cut Nomex and aluminium
honeycomb up to 80 mm thick and presents
many advantages. It offers a very clean cut
without fraying, no materiel residue and
a considerably increased blade lifetime.
The rotary disc can surface Nomex and aluminium honeycomb
and provides a clean cut without fraying, with no material residue,
offering the possibility of working in open environments without a
dust collection system. The cutting and surfacing tools are mounted at
the end of the effector. This effector is suitable for cutting tables, 5-8 axis
machines and robotized cells. It has manual or automated connections
and interchangeable tool holding systems for blades (30, 40, 50 and
80mm) and discs (Ø 15, 18.3, 50 and 63 mm). The cutting effector can
cut monolithic or multi-ply composite materials up to 30mm in thickness
and raw materials such as carbon, Kevlar, aramid, glass and honeycomb
(aluminium/Nomex). This equipment is mainly used for raw material
preparation in the aeronautics sector and by raw material producers.
Booth: Hall 6 - A52

Multi-sector

Booth: Hall 5 - Q80

Aerospace

A SIX-AXIS PICK & PLACE ROBOT FOR LARGE AEROSTRUCTURES

www.sonimat-et.com


http://www.spiritaero.com http://www.cevotec.com http://www.wabashmpi.com http://www.sonimat-et.com

JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Cover
Edito
“For the past 130 years, every aspect of tire performance has been improved, except for one”
Contents
NEWS
In brief
Agenda
Aerospace
BUSINESS
Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
Trends - Automotive: what will be tomorrow’s reality?
Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
China - China’s glass fibre industry is entering a new cycle
MANUFACTURING
Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
Simulation - New updates for the Composite Materials Module’s users
Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
PREVIEW JEC WORLD 2020
- EDUCATION & KNOWLEDGE
- MARKET OVERVIEW / Fact & figures
- AT THE FOREFRONT IN JEC WORLD 2020
- VIEW FROM THE TOP
- INNOVATION
- SUSTAINABILITY
- END-USE MARKETS
- PROCESS & AUTOMATION
- INTERNATIONAL
SOLUTIONS
Book - Composites in infrastructure
Construction - Composites joining science and religion
Urban equipment - Composite infrastructure products: a new alternative for the construction industry
Aeronautics - To new horizons, with composites
Aeronautics - Thermoplastic composite bracket for aircraft engines
Off shore wind energy - Taming the offshore winds
Biocomposites - Where are natural fibre composites heading?
Natural fibres - The challenges of building large structures from flax fibre composite
TECHNOLOGY
Resin - Properties and composite applications of nanocalcitemodified epoxies
Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CF
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CB
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Cover
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 2
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Edito
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - “For the past 130 years, every aspect of tire performance has been improved, except for one”
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 5
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Contents
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 7
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - In brief
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 9
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 10
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Agenda
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 13
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 15
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 16
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Trends - Automotive: what will be tomorrow’s reality?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 18
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 19
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 21
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - China - China’s glass fibre industry is entering a new cycle
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 23
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 24
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 26
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 27
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 28
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 30
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 31
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Simulation - New updates for the Composite Materials Module’s users
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 33
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 35
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 36
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 38
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 40
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 41
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 42
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 43
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 44
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - EDUCATION & KNOWLEDGE
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 46
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - MARKET OVERVIEW / Fact & figures
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - AT THE FOREFRONT IN JEC WORLD 2020
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 49
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 50
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 51
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - VIEW FROM THE TOP
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 53
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 54
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 55
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INNOVATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 57
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 58
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 59
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 60
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 61
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 62
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 63
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 64
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 65
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 66
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 67
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 68
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 69
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - SUSTAINABILITY
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 71
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - END-USE MARKETS
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 73
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 74
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 75
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 76
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 77
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 78
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 79
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - PROCESS & AUTOMATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 81
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 82
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 83
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 84
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 85
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 86
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 87
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 88
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 89
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 90
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INTERNATIONAL
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 92
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 93
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 94
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 95
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 96
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 97
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 98
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 99
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 100
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 101
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 102
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 103
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 104
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 105
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 106
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 107
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 108
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 109
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 110
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 111
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 112
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 113
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 114
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Book - Composites in infrastructure
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 116
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 117
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Construction - Composites joining science and religion
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 119
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 120
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 121
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Urban equipment - Composite infrastructure products: a new alternative for the construction industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 123
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - To new horizons, with composites
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 125
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 126
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - Thermoplastic composite bracket for aircraft engines
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 128
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Off shore wind energy - Taming the offshore winds
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 130
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 131
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 132
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Biocomposites - Where are natural fibre composites heading?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 134
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 135
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Natural fibres - The challenges of building large structures from flax fibre composite
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 137
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 138
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Resin - Properties and composite applications of nanocalcitemodified epoxies
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 140
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 141
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 142
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 143
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 144
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 145
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 146
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 147
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 149
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 150
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 152
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 153
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 155
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 156
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 157
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 158
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com