JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 104

Multi-sector

In addition, the new HexPly M901 offers improved long-term fatigue
performance in automotive suspension parts. Having supplied
heavyweight glass fibre prepregs for automotive leaf springs for more
than 15 years, Hexcel will also present its latest development in prepreg
technology at JEC World 2020. HexPly 901 has been optimized to
provide faster cure cycles and enhanced fatigue performance in these
critical suspension components. Taking a major step forwards from the
company's benchmark HexPly M9 system, HexPly M901 can be cured
in as little as 15 minutes and delivers a 15% mechanical performance
gain over standard prepregs. www.hexcel.com

NEOLAMINATES MADE
FROM THERMOPLASTIC UD TAPES

Booth: Hall 5 - P11

W8SVR neolaminates from
HUESKER Synthetic are made
from thermoplastic UD tapes
and have the potential to further
improve the weight/performance ratio of thermoplastic
composites, increase surface smoothness and reduce waste.
In composite materials, stiffness and tensile strength are largely
determined by fibre length and orientation. Optimum values
can therefore be achieved by using continuous fibres that are
completely stretched and lie straight in the intended load direction of the component, so that tensile and compression forces can be
absorbed as directly as possible by the fibre. Exactly these properties
can be found in UD tapes: the stretched continuous fibre is embedded
in a thermoplastic matrix to which it has good adhesion. Depending
on the field of application and the individual customer requirements,
neolaminates can be produced either by weaving or automatic tape
placement of UD tapes.
They can theoretically have "any" fibre/matrix combination, but glass/
PP, glass/PA6, glass/PA66, or carbon/PP, C/PA6, C/PA66 or C/PA12,
C/PC, C/PPS are the most commonly used materials. Compared to
older generations, they have significantly improved mechanical properties at the same weight per unit, allowing for additional weight reduction
and/or cost benefits from material savings. Due to the lower material
input, the thermoplastic matrix can be heated and cooled even faster,
so that even better cycle times can be achieved than with conventional
organosheets. www.w8svr.com

104

jec composites magazine / No133 March - April 2020

Multi-sector

CARBON NANOTUBES FOR INNOVATIVE
COMPOSITES AND ADHESIVES

Booth: Hall 6 - M31

Miralon products are a new generation of
ultra-long carbon nanotube-based materials.
Unlike standard carbon nanotubes, Miralon
is produced in the form of sheets or yarns and also available
in the form of tapes or pulp. While standard carbon nanotubes
have impressive properties at the nanoscale, their translation to
the macroscale has been challenging. Miralon materials improve
this translation due to their outstanding level of entanglement and
superior length of individual tubes. Thanks to unique mechanical,
thermal and electrical conductivity properties, Miralon sheets and
tapes offer diversified opportunities such as composite embedded
heaters or ultra-lightweight fire barriers as well as heat-release reduction
or vibration damping applications. Miralon yarn can be used as a stitching
material in 3D structures or be included into composite structures
delivering increased toughness through its unique balance of modulus and
elongation. Demonstrated in conductive adhesive applications, the use of
a Miralon pulp dispersed in various matrices provides lightweight electrical
conductivity without compromising other thermo-mechanical properties.
With regard to EHS, Miralon sheets and yarns are classified as articles
by the EPA because they consist of long, bundled, interwoven carbon
nanotubes that are difficult to liberate as respirable particles. Conventional
industrial hygiene and personal protective equipment (PPE) are sufficient
for routine handling, storage and production. www.huntsman.com

Multi-sector

Booth: Hall 5 - J41

Hexcel is supporting NaCa Systems, a Tier 1 specialist in
automotive interior parts that combine natural materials with
carbon fibre in composite parts, to produce a car seat back with
a hybrid wood fibre and carbon fibre construction. The part on
display at JEC World 2020 uses Hexcel's HexPly M77 prepreg in a
one-shot press moulding process with NaCa Systems' thermoset
wood fibre mats, derived from wood industry waste streams.
HexPly M77 is a fast-curing epoxy prepreg that enables
automotive components and sporting goods to be press-cured in
two minutes at 150°C. HexPly woven carbon fibre is used as the
outer surface of the seat back, reinforcing the wood fibre structure
and providing a stunning aesthetic finish.

Booth: Hall 6 - R37b

Automotive

INNOVATIONS
FOR AUTOMOTIVE APPLICATIONS

THERMOPLASTIC SANDWICH PANEL
TECHNOLOGY
Tri-Mack
Plastics
Manufacturing Corporation continues to innovate with the
development of thermoplastic
sandwich panel technology for
aerospace and other weightcritical applications.

By combining UD thermoplastic composite laminates with
traditional honeycomb materials such as Nomex, aluminium,
Kevlar and PEI, the company's sandwich panels provide
lightweight stiffness without the use of adhesives. PEEK, PAEK, PEI,
PPS and PA thermoplastic composites can be processed more costeffectively than thermosets while providing improved performance,
especially in the area of impact resistance.Tri-Mack's automated
thermoplastic composite process uses automated tape laying (ATL)
to produce tailored blanks that are customized to best meet end-user
requirements.
The company plans to combine sandwich panel technology with injection
moulding to create hybrid assemblies, which reduce part count while
optimizing performance. Using its vertically-integrated capabilities, such
as multi-axis machining and bonding, Tri-Mack Plastics manufactures
finished sandwich panel components and assemblies for OEMs and Tier
suppliers to create a variety of stiff, lightweight structures and surfaces,
including access panels, blocker doors, floor panels and fairings.
Its latest thermoplastic composite innovations will be on display in the
US Pavilion, Booth R37b. www.trimack.com


http://www.hexcel.com http://www.huntsman.com http://www.w8svr.com http://www.trimack.com

JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Cover
Edito
“For the past 130 years, every aspect of tire performance has been improved, except for one”
Contents
NEWS
In brief
Agenda
Aerospace
BUSINESS
Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
Trends - Automotive: what will be tomorrow’s reality?
Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
China - China’s glass fibre industry is entering a new cycle
MANUFACTURING
Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
Simulation - New updates for the Composite Materials Module’s users
Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
PREVIEW JEC WORLD 2020
- EDUCATION & KNOWLEDGE
- MARKET OVERVIEW / Fact & figures
- AT THE FOREFRONT IN JEC WORLD 2020
- VIEW FROM THE TOP
- INNOVATION
- SUSTAINABILITY
- END-USE MARKETS
- PROCESS & AUTOMATION
- INTERNATIONAL
SOLUTIONS
Book - Composites in infrastructure
Construction - Composites joining science and religion
Urban equipment - Composite infrastructure products: a new alternative for the construction industry
Aeronautics - To new horizons, with composites
Aeronautics - Thermoplastic composite bracket for aircraft engines
Off shore wind energy - Taming the offshore winds
Biocomposites - Where are natural fibre composites heading?
Natural fibres - The challenges of building large structures from flax fibre composite
TECHNOLOGY
Resin - Properties and composite applications of nanocalcitemodified epoxies
Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CF
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CB
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Cover
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 2
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Edito
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - “For the past 130 years, every aspect of tire performance has been improved, except for one”
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 5
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Contents
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 7
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - In brief
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 9
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 10
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Agenda
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 13
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 15
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 16
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Trends - Automotive: what will be tomorrow’s reality?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 18
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 19
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 21
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - China - China’s glass fibre industry is entering a new cycle
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 23
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 24
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 26
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 27
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 28
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 30
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 31
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Simulation - New updates for the Composite Materials Module’s users
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 33
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 35
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 36
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 38
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 40
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 41
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 42
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 43
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 44
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - EDUCATION & KNOWLEDGE
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 46
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - MARKET OVERVIEW / Fact & figures
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - AT THE FOREFRONT IN JEC WORLD 2020
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 49
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 50
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 51
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - VIEW FROM THE TOP
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 53
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 54
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 55
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INNOVATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 57
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 58
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 59
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 60
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 61
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 62
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 63
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 64
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 65
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 66
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 67
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 68
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 69
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - SUSTAINABILITY
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 71
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - END-USE MARKETS
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 73
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 74
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 75
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 76
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 77
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 78
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 79
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - PROCESS & AUTOMATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 81
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 82
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 83
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 84
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 85
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 86
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 87
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 88
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 89
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 90
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INTERNATIONAL
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 92
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 93
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 94
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 95
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 96
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 97
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 98
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 99
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 100
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 101
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 102
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 103
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 104
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 105
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 106
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 107
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 108
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 109
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 110
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 111
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 112
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 113
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 114
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Book - Composites in infrastructure
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 116
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 117
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Construction - Composites joining science and religion
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 119
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 120
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 121
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Urban equipment - Composite infrastructure products: a new alternative for the construction industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 123
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - To new horizons, with composites
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 125
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 126
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - Thermoplastic composite bracket for aircraft engines
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 128
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Off shore wind energy - Taming the offshore winds
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 130
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 131
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 132
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Biocomposites - Where are natural fibre composites heading?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 134
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 135
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Natural fibres - The challenges of building large structures from flax fibre composite
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 137
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 138
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Resin - Properties and composite applications of nanocalcitemodified epoxies
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 140
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 141
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 142
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 143
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 144
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 145
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 146
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 147
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 149
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 150
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 152
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 153
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 155
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 156
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 157
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 158
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com