JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 103

Booth: Hall 6 - M31

Multi-sector

Huntsman developed two high-performance resin families matching customer performance and processability
requirements for dynamically-loaded
automotive suspension elements:
Araldite LY 3585/Aradur 3831 and Vitrox RTM 00379.
The Araldite LY 3585/Aradur 3831 epoxy resin is responding to the
market demand for improved productivity and long-term dynamic
loading under severe hot/wet conditions over incumbent materials. With more than 90-second injection capability and a cure
time as low as 5 minutes at 105°C, it is suitable for fast and robust
HP-RTM processing, allowing the efficient production of high-thickness
composite parts. The latter combined with high thermo-mechanical
properties (glass transition of 125°C) and fatigue resistance allowed the
new epoxy solution to complete a first qualification for leaf spring applications. The Vitrox RTM 00379 polyurethane resin brings processing
and property advantages over existing PU resins. Featuring a viscosity
below 100 mPa.s for a minimum of 55 seconds, it limits pressure buildup during impregnation and enables full wet-out of the dense fibre
pack. Vitrox snap cure enables a short demoulding time and the built-in
internal mould release allows fast demoulding with low tool cleaning.
Performance is also best-in-class. A glass transition temperature above
130°C, combined with tensile failure strains above 10% and a critical
energy release rate GIC that surpasses 600 J/m2, enable the production
of durable, impact- and fatigue-resistant structural parts such as leaf
springs. www.huntsman.com

BIO-BASED EPOXY SYSTEMS FOR WIND
ENERGY AND AUTOMOTIVE

Sicomin's SGi 128 is a new,
innovative
intumescent
epoxy
gelcoat that is particularly well suited
to fire-retardant coating applications
for critical components found in the
wind energy and civil engineering
markets.
The gelcoat is produced with 38%
of carbon content from non-oil
sources and is a halogen-free gelcoat that provides outstanding
fire protection for epoxy laminates and extremely low smoke
toxicity. Available with both fast and slow hardeners, this easy-to-apply
epoxy system forms a much tougher and waterproof part surface
than traditional intumescent coatings. SGi 128 is available in industrial
volumes with short lead times and has been successfully tested to EN
13501 (EUROCLASS B-S1-d0) and ASTM E84 (Class A).
Sicomin's new bio-resin specifically formulated for HP-RTM processing,
SR GreenPoxy 28, is the sixth product in the company's renowned
GreenPoxy range. SR GreenPoxy 28 is a fast-cycle, low-toxicity, thirdgeneration bio-based formulation aimed specifically at the HP-RTM
moulding processes used for both high-performance automotive
structural parts and aesthetic carbon fibre components. The new
formulation has been optimized for fast production cycle times and
superior mechanical performance and is a suitable alternative to
traditional resins, providing exceptional performance and quality for
high-volume programmes. www.sicomin.com
Booth: Hall 6 - G43

CHEMISTRY CHOICE FOR
COMPOSITE SUSPENSIONS

INNOVATION REPORT

Automotive

PREVIEW JEC WORLD

Booth: Hall 5 - F17

Automotive

INTERMEDIATES
BEST-IN-CLASS HIGH-TEMPERATURE PHTHALONITRILE PREPREGS
Azista Industries is introducing a phthalonitrile resin-based prepreg. Composite materials made with these prepregs perform
exceptionally well at extreme temperatures in excess of 250°C. The composites are thermally stable and display excellent hot/
wet mechanical properties suitable for applications with extended exposure to temperatures at 250-350°C and between 350450°C for shorter lengths of time. Azista's phthalonitrile prepreg offers best-in-class shelf life when stored below 35°C and in a
moisture-free environment, for up to one year. These prepregs exhibit excellent tack and drape properties while providing easy
handling with minimal moisture absorption. Phthalonitrile prepregs are cured through additional polymerization, leading to void-free components.
They display superior fire, smoke, and toxicity (FST) performance and are developed based on non-toxic chemistries. Laminates with a thickness
of 3mm have been successfully post-cured to 350°C. Composites fabricated using phthalonitrile prepregs can replace titanium alloys in many
applications and offer increased design flexibility and substantial weight savings. They have a high glass transition temperature of ~375°C. Typical
applications include jet engine components, missile parts, heat shields, and heat protection systems. www.azistaaerospace.com

Booth: Hall 5 - J41

Marine

NEW MARINE PRODUCTS ENABLE SHORT CYCLE TIMES
Hexcel will present the new HexBond 679 low-temperature film adhesive and new HexPly UD carbon tapes with air venting Grid Technology,
both specifically tailored to offer cycle time reductions within the marine industry. HexBond 679 is a 250gsm epoxy adhesive film formulated to
be fully compatible with the HexPly M79 prepreg range. Fully cured in only four hours at 80°C, this adhesive film system offers huge cycle time
reductions, provides strong lap shear & peel strength performance and delivers outstanding mechanical properties in foam and honeycomb
sandwich structures. When combined with Hexcel's innovative air venting Grid Technology, HexPly M79 UD carbon tapes can be laminated
with reduced debulking steps to produce void contents below 1% irrespective of laminate thickness. The company will also demonstrate the
exceptional surface finish provided by the HexPly XF2 surfacing prepreg in Sunseeker's superstructure component. Highly drapeable with a
tacky surface to adhere to the mould tool for an efficient lay-up process, HexPly XF2 provides a high-quality pin-hole-free finish straight from the
mould, reducing finishing and paint preparation time significantly. The component on display also features carbon fibre HexPly SuperFIT prepregs
providing structural strength below the XF2 surface layer. Hexcel recommends the use of HexPly M79 SuperFIT prepregs, which allow rapid cure
cycles at low temperatures and are easy to process in conjunction with conventional HexPly M79 prepregs. www.hexcel.com

No133 March - April 2020 /

jec composites magazine

103


http://www.huntsman.com http://www.sicomin.com http://www.azistaaerospace.com http://www.hexcel.com

JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Cover
Edito
“For the past 130 years, every aspect of tire performance has been improved, except for one”
Contents
NEWS
In brief
Agenda
Aerospace
BUSINESS
Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
Trends - Automotive: what will be tomorrow’s reality?
Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
China - China’s glass fibre industry is entering a new cycle
MANUFACTURING
Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
Simulation - New updates for the Composite Materials Module’s users
Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
PREVIEW JEC WORLD 2020
- EDUCATION & KNOWLEDGE
- MARKET OVERVIEW / Fact & figures
- AT THE FOREFRONT IN JEC WORLD 2020
- VIEW FROM THE TOP
- INNOVATION
- SUSTAINABILITY
- END-USE MARKETS
- PROCESS & AUTOMATION
- INTERNATIONAL
SOLUTIONS
Book - Composites in infrastructure
Construction - Composites joining science and religion
Urban equipment - Composite infrastructure products: a new alternative for the construction industry
Aeronautics - To new horizons, with composites
Aeronautics - Thermoplastic composite bracket for aircraft engines
Off shore wind energy - Taming the offshore winds
Biocomposites - Where are natural fibre composites heading?
Natural fibres - The challenges of building large structures from flax fibre composite
TECHNOLOGY
Resin - Properties and composite applications of nanocalcitemodified epoxies
Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CF
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CB
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Cover
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 2
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Edito
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - “For the past 130 years, every aspect of tire performance has been improved, except for one”
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 5
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Contents
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 7
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - In brief
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 9
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 10
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Agenda
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 13
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 15
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 16
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Trends - Automotive: what will be tomorrow’s reality?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 18
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 19
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 21
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - China - China’s glass fibre industry is entering a new cycle
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 23
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 24
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 26
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 27
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 28
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 30
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 31
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Simulation - New updates for the Composite Materials Module’s users
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 33
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 35
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 36
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 38
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 40
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 41
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 42
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 43
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 44
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - EDUCATION & KNOWLEDGE
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 46
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - MARKET OVERVIEW / Fact & figures
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - AT THE FOREFRONT IN JEC WORLD 2020
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 49
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 50
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 51
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - VIEW FROM THE TOP
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 53
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 54
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 55
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INNOVATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 57
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 58
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 59
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 60
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 61
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 62
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 63
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 64
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 65
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 66
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 67
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 68
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 69
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - SUSTAINABILITY
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 71
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - END-USE MARKETS
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 73
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 74
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 75
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 76
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 77
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 78
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 79
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - PROCESS & AUTOMATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 81
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 82
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 83
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 84
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 85
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 86
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 87
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 88
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 89
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 90
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INTERNATIONAL
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 92
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 93
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 94
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 95
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 96
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 97
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 98
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 99
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 100
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 101
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 102
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 103
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 104
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 105
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 106
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 107
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 108
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 109
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 110
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 111
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 112
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 113
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 114
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Book - Composites in infrastructure
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 116
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 117
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Construction - Composites joining science and religion
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 119
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 120
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 121
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Urban equipment - Composite infrastructure products: a new alternative for the construction industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 123
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - To new horizons, with composites
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 125
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 126
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - Thermoplastic composite bracket for aircraft engines
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 128
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Off shore wind energy - Taming the offshore winds
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 130
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 131
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 132
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Biocomposites - Where are natural fibre composites heading?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 134
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 135
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Natural fibres - The challenges of building large structures from flax fibre composite
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 137
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 138
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Resin - Properties and composite applications of nanocalcitemodified epoxies
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 140
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 141
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 142
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 143
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 144
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 145
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 146
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 147
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 149
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 150
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 152
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 153
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 155
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 156
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 157
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 158
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com