JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 20

MANUFACTURlNG fibre placement
ranges for prepreg material. The equally
important and significantly more complex deposition process is monitored
through a force-moment sensor at the
gripper.
Compaction time is determined by the
robot movements. This combination
enables a precise recording of the
deposition and compaction as well as
the characteristics of the gripper body
deformation in the deposition process,
even on complex part geometries.

xxxxxxxxxxxxxx

parameters (KPPs) that determine the
adherence to the KC of a composite
part, manufacturers can replace individual unit tests by an automated
monitoring of these KPPs. Equipped
with sensors that monitor all the
relevant process parameters, the Fibre
Patch Placement production systems
of Cevotec's SAMBA Series allow for
quality control during production.
Fibre Patch Placement
Building components additively with
discrete elements, called patches,
allows for an individual check of each
fibre patch before placement - and for
individual patch rejections if not within
specifications.
Several sensors monitor the entire
process, from cutting the patches from
a tape spool to the pressure-controlled
fibre deposition, in order to ensure
minimum process tolerances.
This allows manufacturers to select and
define their relevant KPPs to ensure
KC compliance. For example, a first
camera system continuously measures
and records the width, gapless-ness
and waviness of the fibre tape that is

20

processed. It also monitors the patch
length and cut-edge geometry.
Only patches that meet all requirements
are added to the component, rejected
patches are sorted out without any
influence on the production process.
This effectively prevents the deposition
of defective material.
Precise deposition
To ensure adherence with industry
guidelines for gaps and overlaps in
carbon fibre laminates, a second camera
system records the individual patches
that are picked up by the gripper, measures their exact position and orientation relative to the gripper and corrects
any deviations before placing the patch
on the calculated deposition point.
The deposition process of a patch is
defined by a combination of pressure,
temperature and contact time - these
key deposition parameters of the patch
gripper are also recorded.
The system's sensors measure - contactless for each individual patch - the
patch surface temperature.
This enables the adherence to the
important processing temperature

	 jec composites magazine / N°129 July - August 2019

Tight repeatability
The deposition precision can be compared - for each individual patch - from
component to component for deviations. With every patch processed, the
system gets smarter as values are added
to, and compared with, a database of
previous processed patches. This guarantees not only a tight repeatability of
the deposition process, but also enables
predictive maintenance as operators
can be alerted for a gripper change as
the system detects e.g. fatigue through a
deviation in the compaction force.
Along with standard process parameters such as robot cycle times, environmental parameters like temperature or
humidity, all relevant data are analysed
already during production and can later
be accessed for more extensive analyses.
In summary, Cevotec's smart and sensor-rich SAMBA systems for complex
aerospace layups enable an automated
and precise monitoring of key process
parameters that determine key characteristics of the final laminate.
This opens up opportunities to replace
individual unit tests of composite
components with integrated process
control, significantly reducing the
time and cost of aerospace composite
production.

More information:
www.cevotec.com


http://www.cevotec.com

JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019

Cover
Edito
Moving composites forward: on the shoulders of giant
Contents
NEWS
In brief
Successful partners
Agenda
BUSINESS
Matrix - CFRP composite manufacturing trends
Cost - A brand-new approach for economically competitive composites
MANUFACTURING
Fibre placement - Replacing individual unit tests by integrated process control
NDT - Optical metrology improves the production of composite products at every step
Initiative - Spotlights from the world of lightweighting
FEATURE SPORTS & LEISURE - The largest testing ground
Success story - DPS designs the world’s most advanced skis
Carbon - New type of unidirectional prepreg for sport applications with complex shapes
Additive manufacturing - lnnovative composite bicycle frame
Textile - Porcher lndustries: excellence in sports and leisure
Innovations - Sports on the scene at JEC World 2019
Carbon - The next generation of high-performance rigging
Standardisation - Research, innovation and development for composite marine and offshore applications
SOLUTIONS
Infrastructure - Can carbon-reinforced concrete replace steel in the long run?
Art - “Train your brain, think disruptive, outside the box and follow your visions!”
Music - Music instruments from carbon, glass or flax fibres
Watch - A watch ahead of its time
In the world - Composites visit the doctor
TECHNOLOGY
Ageing - Effects of ageing on the mechanical and structural properties of glass/epoxy composite pipes in seawater
Inside the lab - Advanced Composites Research Group – Queen’s University Belfast
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 68
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Cover
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 2
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Edito
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Moving composites forward: on the shoulders of giant
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 5
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Contents
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 7
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - In brief
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 9
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Successful partners
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Agenda
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Matrix - CFRP composite manufacturing trends
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 13
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 14
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Cost - A brand-new approach for economically competitive composites
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 16
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 17
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 18
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Fibre placement - Replacing individual unit tests by integrated process control
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 20
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - NDT - Optical metrology improves the production of composite products at every step
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 22
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 23
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Initiative - Spotlights from the world of lightweighting
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 25
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 26
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Success story - DPS designs the world’s most advanced skis
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 28
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Carbon - New type of unidirectional prepreg for sport applications with complex shapes
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 30
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Additive manufacturing - lnnovative composite bicycle frame
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 32
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Textile - Porcher lndustries: excellence in sports and leisure
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 34
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 35
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Innovations - Sports on the scene at JEC World 2019
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 37
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Carbon - The next generation of high-performance rigging
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 39
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Standardisation - Research, innovation and development for composite marine and offshore applications
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 41
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 42
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Infrastructure - Can carbon-reinforced concrete replace steel in the long run?
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 44
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 45
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 46
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Art - “Train your brain, think disruptive, outside the box and follow your visions!”
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 48
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Music - Music instruments from carbon, glass or flax fibres
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 50
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 51
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Watch - A watch ahead of its time
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 53
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - In the world - Composites visit the doctor
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 55
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Ageing - Effects of ageing on the mechanical and structural properties of glass/epoxy composite pipes in seawater
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 57
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 58
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 59
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 60
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 61
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Inside the lab - Advanced Composites Research Group – Queen’s University Belfast
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 63
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 64
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 65
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #129 - July/August 2019 - 67
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com