JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 35

angle. This is the first collision. If the
broken fan blade does not penetrate
through the fan case, the fan blade
rolls and then collides with the inner
surface with its engine shaft (hub) end.
This is called the second collision. The
sub-component test for evaluating such
a behaviour and damage to the fan case
is the curved panel impact test, which
is schematically illustrated in Figure 5.
An impact analysis was also conducted
to assess the behaviour of the projectile
and the damage to the panel, showing
that the behaviour and damage could
be analytically estimated. Figure 6
shows an example of curved panel
impact test and analysis result.

Fig. 7: Half-ring impact test

Fig. 8: Containment rig test

curved panel impact test, and half-ring
impact test.
Component test (FBO test)
The FBO test was conducted as the
final stage of the building block. During
the test, titanium alloy fan blades were
fit into a full-size fan case designed on
the basis of the results of previous tests,
in the same way as in an actual airplane.
Then, one of the rotating fan blades
was released using gunpowder at its dovetail end (the part for fixing the airfoil
to the hub), and then it was verified
whether the fan case could contain the
released fan blade. Figure 8 illustrates
the FBO test, in which a state immediately after the fan blade was released
is shown. As a result of the FBO test,
although the fan case was damaged, the
fan blade was contained, and therefore
the validity of the design was verified.

Coupon test (gelatin impact test)
In order to develop a high impact
resistant material suitable for the fan
blade and SGV, a gelatin high-speed
impact test was conducted on a flat
plate. During the test, a gelatin ball
simulating a bird was shot with an air
gun into the centre of the flat plate,
which simulated the vane. The impact
caused wavelike deformations on the
edges of the composite flat plate, and as
a damage mode, delamination occurred
in the material. The material was evaluated on the basis of the delamination
area with respect to the gelatin impact
energy.
Figure 9 illustrates the gelatin impact
test and results. As a result of repeatedly improving the fibre-matrix interface
with the use of a tough epoxy composite proven to be an impact-resistant
composite (Composite E) and a thermoplastic composite (Composite F) as
benchmarks, a thermoplastic composite (Composite C) that suffers less
delamination damage was developed.
From the results of this test, Composite
C was selected as the material and press
moulding as the moulding method for
the fan blade and SGV. The sub-component and component tests at the
upper stages of the building block were
conducted using this material system.

Fig. 9: Gelatin impact test and results

No106 July 2016 / jec

FEATURE AERONAUTICS

Half-ring impact test
In the curved panel impact test, the
weight of the projectile is a few dozen
grammes, which is significantly lighter
than the weight of an actual fan blade.
Therefore, in order to evaluate the
containment performance using a projectile with a weight equivalent to that
of an actual fan blade, the high-velocity
impact test was conducted using half of
a ring being the same shape as that of
the engine. This test is called a half-ring
impact test (Figure 7).
Figure 7 shows a schematic view of the
half-ring impact test and the moment
when the projectile collides with the
half ring. In this test, the projectile was
shot parallel to the shot direction and
it collided perpendicular to the inner
surface of the test piece.
The scale effect of the containment
performance in the high-velocity impact test was evaluated by combining
the results of the flat plate impact test,

Development of composite
structural guide vanes

composites magazine 35



Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #106 - July 2016

Cover
Edito
Point of view: Europe
Contents
COMPANY & BUSINESS
Development
Agenda of Events
APPLICATIONS
Thermoplastics
Automotive
MARKET
Aircraft engine
FEATURE AERONAUTICS
Aerostructures
Characterisation
Thermoplastics
Aero-engines
Process
CFRP
Semi-product
RESEARCH & DEVELOPMENT
Review
Core material
TECHNOLOGY & INNOVATIONS
NDT
Marine
Index
In the world
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Ad1
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Cover
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 2
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Edito
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Point of view: Europe
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 5
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Contents
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 7
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - COMPANY & BUSINESS
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 9
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Development
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 11
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Agenda of Events
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 13
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - AdHEC
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - AdCro
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Thermoplastics
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 15
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 16
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Automotive
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Aircraft engine
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 19
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 20
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 21
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 22
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Aerostructures
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 24
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 25
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Characterisation
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 27
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 28
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 29
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 30
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Thermoplastics
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 32
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Aero-engines
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 34
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 35
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 36
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Process
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 38
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 39
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - CFRP
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 41
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 42
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Semi-product
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 44
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 45
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Review
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 47
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 48
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 49
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Core material
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 51
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 52
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - NDT
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 54
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Marine
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 56
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - Index
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - In the world
JEC COMPOSITES MAGAZINE - Issue #106 - July 2016 - 59
https://www.nxtbook.fr/newpress/jeccomposites/jcm2211_148
https://www.nxtbook.fr/newpress/jeccomposites/jcm2209_147
https://www.nxtbook.fr/newpress/jeccomposites/jcm2206_146
https://www.nxtbook.fr/newpress/jeccomposites/jcm2204_145
https://www.nxtbook.fr/newpress/jeccomposites/jcm2201_144
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com