JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 66

JEC Europe 2013
Lower costs in CFRP
parts production

> Booth T14

Multisector

Cannon announces the recent development and supply of a
complete, automatic turnkey line for its innovative “Liquid
Lay-down” process. This process is an up-coming alternative to RTM technology for carbon-fibre-reinforced automotive
parts.
The optimization
of the process,
through the integration of three
anthropomorphic
robots to obtain
a fully-automatic
line, was aimed
to achieve a low
part-to-part cycle
time. This, combined with its intrinsic requirement for a lower
compression force in the part forming phase, which above all
results in a reduced capital investment, positions this process as
a very competitive substitute for traditional HP-RTM in the automotive field, providing a lower part cost to the manufacturer.
Several innovative Cannon technologies are wisely combined in
this solution: from the high-pressure Estrim metering unit and
mixing head, for proper dosing of the two-component epoxy
resin, to a specifically designed air-less distribution die for uniform distribution, with laminar flow, of the resin-hardener mix
directly onto the reinforcement carbon fibre stack outside of
the mould. Alongside these, a large size hot press with accurate
parallelism control (for part forming), and a low-tonnage cold
press (for controlled cooling of parts) have also been designed
and supplied by Cannon.
A stable process with high output and high quality has thus
been developed and successfully installed. www.cannon.com

Multisector

Automotive

Research & Development
High-performance recycled
plastic lumber (RPL)

> Booth B02

The PROWASTE Project
intends to promote an innovative industrial process
for the manufacture of highperformance recycled plastic
lumber for urban/outdoor
furniture. The raw material is
mixed plastics waste normally
destined for landfill or energy
recovery. The innovation consists in introducing reinforcing
pultruded rods in the plastic
matrix during the extrusion
process, without any substantial modification of the existing production plant used for
plastic lumber moulding. Compared with unreinforced plastic
lumber, flexural properties are increased by a factor of 3 while
creep compliance is more than one order of magnitude lower
than for unreinforced beams. At the moment, the modified
production system is operated at the plant of Solteco Madera
Plastica, one of the project partners. The PROWASTE solution
is ready to enter into the market. Innovative reinforced plastic
lumber can be used in new applications where mechanical
properties are a fundamental issue, such as pallets or railroad
ties. The increased flexural stiffness also makes it possible to reduce the thickness of the lumber, which means lower costs and
improved aesthetic characteristics. The main economic benefit
for customers is linked to the lower maintenance and replacement costs with respect to traditional materials. Compared to
wood, the cost saving of an RPL landscaping application, like a
bench, ranges from 18% to 32%.
www.prowaste.eu

Multifunctional parts made of thermoplastic hybrid yarns

> Booth Y54-4

The Composites department of the Institute of Aircraft Design of the University
of Stuttgart specialises in research topics related to the design and manufacturing of composite parts based on textile structures. Different projects focus on
the whole process chain, from the manufacturing of textile preforms to injection
technology through to the finished component.
A recent project focuses on the processing and development of thermoplastic hybrid
yarns (carbon/PA6, glass/PA6.6). An innovative design and process chain has been
developed in cooperation with Weberit GmbH, IPF Dresden, University Siegen, Tajima GmbH and TIME GmbH. It has been proven and tested successfully, using the
example of a torque supporter for compact cars. Multifunctional parts can be designed using the tailored fibre placement (TFP)
technology in combination with a new grouting and overmoulding process. The grouting tool exactly displays the topography
of the embroidered preforms. The tool topography is derived using a software tool called EDOPunch developed by IPF. Thus, a
constant grouting pressure is guaranteed in every part of the preform and all the fibres stay in their defined positions. This ensures
a maximum weight saving potential and repeatable quality. The production process is very fast due to the short curing time of the
PA6/PA6.6 matrix and addresses medium- to high-volume production. There are also very low cut losses due to TFP near-netshape production.
www.ifb.uni-stuttgart.de

66 jec composites magazine / No79 March 2013


http://www.cannon.com http://www.prowaste.eu http://www.ifb.uni-stuttgart.de

JEC COMPOSITES MAGAZINE - Issue #79 - March 2013

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #79 - March 2013

Cover
Edito
Point of view: research & industry
Contents
Agenda of Events
COMPANY & BUSINESS
- In brief
- Core materials
APPLICATIONS
- Formula 1
- Equipment
- Wind energy
MARKET
- Europe
- Patents
FEATURE SPECIAL JEC EUROPE 2013
- Turkey, country guest of honor
- 7th International Composites Summit
- JEC Europe lnnovation Awards Programme
- lnnovation report and news
- Sustainability
RESEARCH & DEVELOPMENT
- Additive
- Fabric
TECHNOLOGY & INNOVATIONS
- Process
- Matrix
- Nano
- Resins
- Process
Index
In the world
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - Cover
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 2
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - Edito
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - Point of view: research & industry
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 5
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - Contents
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 7
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 8
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 9
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 10
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 11
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - Agenda of Events
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 13
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 14
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - In brief
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - Ad1
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - Ad2
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 16
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 17
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Core materials
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 19
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 20
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Formula 1
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 22
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 23
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Equipment
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 25
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Wind energy
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 27
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Europe
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 29
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 30
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 31
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 32
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 33
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Patents
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 35
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 36
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 37
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Turkey, country guest of honor
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 39
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 40
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 41
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 42
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 43
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - 7th International Composites Summit
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 45
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 46
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 47
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - JEC Europe lnnovation Awards Programme
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 49
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 50
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 51
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 52
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 53
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 54
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 55
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - lnnovation report and news
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 57
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 58
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 59
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 60
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 61
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 62
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 63
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 64
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 65
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 66
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 67
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 68
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 69
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 70
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 71
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 72
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 73
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 74
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 75
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 76
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 77
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Sustainability
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 79
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 80
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 81
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 82
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 83
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 84
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Additive
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 86
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 87
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 88
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Fabric
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 90
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 91
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 92
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 93
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 94
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 95
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 96
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Process
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 98
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 99
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Matrix
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 101
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 102
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 103
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 104
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Nano
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 106
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 107
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Resins
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 109
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - - Process
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 111
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 112
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - Index
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - In the world
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 115
JEC COMPOSITES MAGAZINE - Issue #79 - March 2013 - 116
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com