All the performance values above are based on experimental results obtained during testing under laboratory conditions. These are typical values and do not constitute specification minima. More information Main characteristics: - Very short moulding cycle (15 sec. to 2 min.) - Excellent impact and fatigue resistance - Unlimited storage at room temperature - Excellent surface finish - Low water absorption - Weldability and post-formability - Inert to aggressive chemicals Fig.3: Thermoplastic fabric (monoply) Conclusion Compared with current standard products, Carbostamp® is a technical solution which can meet the requirements of many industrial sectors such as automotive, sports and leisure, aerospace and industrial markets. It is a comprehensive product that offers the high technical properties of a composite material and is as easy to implement and process as metal. Contact: maurice.geli@soficar-carbon.com (technical) didier.escabert@soficar-carbon.com (commercial) Storage and handling precautions Storage time is unlimited (Figure 3). Before processing, Carbostamp® should be stored at room temperature. When processing, it is highly recommended to use carbon-proof electrical cabinets to avoid short circuits. The usual precautions for handling plastic resins should be observed. Now available in digital version No37 December 2007 / JEC Composites Magazinehttp://www.resininfusion.com http://www.jeccomposites.com/magazine-subscription/